We have a Tire Shredder system with 1600 hours on it.  New in 1993, used until 1995.  
Still set up ready to work.  Was used for Shredding semi-truck tires but can be used 
to shred just about anything.  It comes with an extra set of knives. New, the shredder 
without classifiers or conveyors lists for $150,000 

Price USD$150,000.  FOB MID WEST USA 
Attached are pictures and specs. 

This operation will cut up to 1/8” material. Depending upon the sharpness of the knives 
it will cut 5 to 7 tons an hour of tires. The largest type of tire it can handle without 
cutting up it first is a farm tractor tire. The shredder is dismantled into 3 parts and 
ready to ship. Most likely 2 truck loads. 



SSI Shredding System: 
Model: 2400H 
HP:      200HP 
Drive:  KYB375-5,25 

Shredder Head Dimensions 
a. cutting chamber width (in.)       40 
b. cutting chamber length            60” 
c. discharge    (L x W )             40” x  66.25” 
d. overall length                    134” 
e. overall width                     50” 
d. shredder frame thickness          22.5” 
f. removal space  ( L x W x H )      18’ x 10’ x 12’ 
h. standard stand height             38” 

Weight 
a. shredder assembly                 23,000 lbs. 
b. part weight 
   1. shredder head                  21,000 lbs. 
   2. hydraulic motor                1,698 lbs. 
   3. cutter weight                  125 lbs. 
   4. end plate                      2,000 lbs. 

1. Drive Hydraulic 
2. Planetary Reducer 
  a. torque ft x lbs.       Max.           72,135 
  b. torque ft x lbs.       Per 1000psi    22,733 
  c. ratio                                 5.25 
3. shaft speed 
  a. drive shaft           rpm      15.96 
  b. driven shaft          rpm      12.99 
4. shaft torque 
  a. drive shaft            ft x lbs.    68199 
  b. driven shaft           ft. x lbs.   83787.34 
5. cut force at tip 
  a. drive shaft            lbs.          77,941.71 
  b. driven shaft           lbs.          95,756.96 
6. cutting tip speed 
  a. drive shaft          ft / min.      87.69 
  b. driven shaft         ft / min.      71.37 
7. frame 
  a. construction           welded torsion box 
  b. material               A-36 plate 
8. shaft 
  a. material                Astralloy 
  b. diameter at cutter ( in )            6.375 
9. motor      200hp 
  a. rpm      1780 
  b. frame    445T TEFC 
  c. service   460V / 3ph / 60 hz 
  d. service factor    1.15 
  e. manufacture        Lincoln 
10. hydraulic pump 
  a. manufacturer             Dennised 
  b. description              fixed displacement valve 
  c. model                    T6BD – 045-045 
  d. total displacement   (GPM)      136 gpm 
  e. weight hydraulic pump unit       6000 lbs. 
11. hydraulic motor 
  a. description                     Mini Cam Piston 
  b. type                            motor planerary 
  c. manufacture                     KYB 
  d. model                           375 
12. cooler 
  a. description                    air / oil cooler 
  b. manufacture                    Young 
  c. model                          OCS- 1500 
  d. capacity                       96.5 btu / mini-p 
  e. power                          5 hp / 460 v / 3ph 

electrical 
1. motor starter panel (MSP) 
2. control transformer 
3. control panel 
a. programmable controller Allen Bradley SLC-150 
b. key switch, power on light 
c. hour meter 
d. HPU motor – run light 
e. HPU motor – stop light 
f. HPU tank heater indicator – light 
g. Shredder – run light 
h. Shredder – stop light 
i. Hot, cold, low oil light 
j. Jam reset- light 
k. Emergency stop – light Manual